SecuRam Motor Driven Springbolt
Description
The SpringBolt is a bevelled bolt safe lock and is designed for use on safe inner compartments or cabinets where boltwork is not provided.
The SpringBolt is non-deadlatching and is sometimes referred to as a "slam" bolt.
The Springbolt utilizes a motor-driven gear box to retract and extend the lock bolt. This lock does not use a plastic nut/threaded shaft or disengaging drive train mechanism as is common in other deadbolt safe locks. As a result the SpringBolt will provide longlasting performance and protection.
The lock remains retracted for 6 seconds and then automatically extends.
As with all SecuRam lock bodies, the SpringBolt can operate in two modes:
Analog mode for use with SafeLogic Series EntryPads
Digital mode for use with ProLogic and ScanLogic EntryPads
See Analog versus Digital Mode video below for instructions to convert the lock from one mode to the other.
The SpringBolt is Bluetooth compatible and can be used in conjunction with SecuRam's Bluetooth EntryPads.
The SpringBolt lock body can be used to replace any standard sized safe lock.
The SpringBolt can be easily retrofitted on most safes.
Technical Specifications
Power Supply: DC 9V
Power Supply Range: DC 4.5V – 12V
Standby Current: <50uA <20uA (Typical)
Active Current: <20mA
Lock Open Time: 6 seconds
Battery Low Voltage: 5.2+/- 0.2V
Mechanical System Life Span: >100,000 cycles
Working temperature: -25 deg C ~ +60 deg C
Working humidity: <95%
Storage temperature: -45 deg C ~ +85 deg C
