Doorworks Garage Door (Original) Remote 4 Button
Description
Suits Door Works DC800N & DC1200N garage door openers
4 channel remote
Frequency: 433.92 MHz
Programming Instructions:
Additional remote handsets can be coded as follows (maximum of 6 can be coded into one unit)
- Push and hold the “P” and “+” buttons at the same time until the LED 7 flashes, then release
- Push and hold “+” until LED 7 glows strongly and release
- Press desired remote button twice, LED 7 will flash
- If more remotes are to be programmed, push and hold “+” until LED 7 glows and programme remote
- Repeat for all additional handsets
- Push “P” to end setup.
Note that if more than 6 remotes are attempted to be coded the first remote code will be deleted.
To delete remote control codes.
- Push and hold the “P” and “+” buttons together until the LED 7 flashes
- Push and hold the “—“ button for 6 seconds
- The code memory has been cleared and all previously programmed Remotes will no longer operate this door
- Follow Step 4 to code new Remotes